Liquid Level Detection; Protocol - Thermo Scientific Wellwash Versa User Manual

Menus, Tabs and Parameters
Main menu
Liquid level
56 Thermo Scientific Wellwash Versa User Manual
The info text bar also shows the liquid level in the bottles (A, B, R, and
W). The liquid bottles have sensors to enable liquid level detection. Fill
detection
the buffer bottles and empty the waste bottle if the red bottle icon
appears on the info text bar. Refer to "Sensors" on page 83.
Liquid level detection (LLD):

Protocol

The Protocol row in the Main menu shows the name of the active
protocol.
You can open another protocol by pressing the
Protocol row or by pressing the
the software will appear. The protocols are listed in alphabetical
order by protocol name. At least 100 wash protocols can be saved to
memory.
It is possible to protect protocols from accidental editing or deleting. A
locked symbol is shown in front of the protocol name when locked.
To lock/unlock a protocol, select it on the protocol list and press the
3 (Lock) key.
F
Liquids A, B, and Rinse
icon is green
•
icon is red
•
bottle is nearly empty or disconnected (The warning
is activated when there is approximately 290 ml in
the 2 liter wash bottle / 580 ml in the 4 litter wash
bottle.)
icon is empty with a cross when the LLD is disabled
•
Waste
icon is red
•
bottle is full or disconnected
icon is green
•
icon is empty with a cross when the LLD is disabled
•
when the bottle is filled with liquid
with an exclamation mark when the
with an exclamation mark when the
when the bottle is not yet full
button on the
OK
key. The list of protocols saved in
FILE
Thermo Fisher Scientific