Installing the
priming vessel
Thermo Fisher Scientific
1. Remove the padded packing material protecting the wash head arm
and plate carrier to reveal the transport lock and transport lock tag
(Figure 2–6). Also remove the plastic transport protection bag.
Figure 2–6. Transport lock and transport lock tag
2. Unfasten the transport lock screw with the Allen key supplied
(Figure 2–7).
Figure 2–7. Unfastening the transport lock
3. Keep the transport lock and tag for future relocation or
transportation of the instrument.
The instrument comes with the priming vessel installed. The priming
vessel is correctly installed if it stays in place and does not move up. If
the priming vessel is not installed, insert it downwards and pull it
towards yourself (Figure 2–8).
Thermo Scientific Wellwash Versa User Manual
Installation
Setups
17