Liquid Bottles And Channels - Thermo Scientific Wellwash Versa User Manual

Installation
Setups
Liquid bottles and
Venting holes
22 Thermo Scientific Wellwash Versa User Manual
Figure 2–14. Installing the 2x8 cell wash head onto the wash head arm
The Wellwash Versa includes three standard buffer bottles (2 liters) and
the waste bottle (4 liters). Bottles for greater volumes are available as an
channels
option (4 l for buffers and 9 l for waste).
The liquid channels are: A (for Buffer A), B (for Buffer B), R (for
Rinse), and W (for Waste). Channel R is primarily intended for rinsing
and is connected to the
channel can also be used in wash protocols as the buffer source. The
rinse solution is normally deionized distilled water.
The liquid bottles are named and the tubing is color coded to
correspond to the correct buffer source (A = blue, B = yellow, R =
green, and W = colorless) (Figure 2–15). Refer to "Connection
diagram" on page 23.
Figure 2–15. Waste and liquid bottles with liquid level sensors
Adapters
button as the only channel. The Rinse
RINSE
Sensor cable
Liquid filter
Intake tube
Thermo Fisher Scientific