Table of Contents
Advertisement
Chapter 2
Installation
Warning The Wellwash Versa weighs 9 kg [19.8 lbs.] and care must be
taken when lifting the instrument.
▲
For more information on main parts of the instrument, refer to Chapter
3: "Wellwash Versa Main Parts".
What to do upon
This section covers the relevant procedures to be carried out on receipt
of the instrument.
delivery
How to unpack
Move the packed instrument to its site of operation. To prevent
condensation, the instrument should be left in its protective plastic
wrapping until the ambient temperature has been reached. Unpack the
Wellwash Versa instrument and accessories carefully with the arrows on
the transport package pointing upwards. Place the instrument onto a
laboratory bench.
Caution Do not touch or loosen any screws or parts other than those
specifically designated in the instructions. Doing so may cause
misalignment and will invalidate the instrument warranty.
▲
Retain the original packaging for future transportation. The packaging
is designed to assure safe transport and minimize transit damage. Using
other packaging materials may invalidate the warranty. Also retain all
instrument-related documentation provided by the manufacturer for
future use.
If you relocate your instrument or ship it for service, refer to "How to
pack for service" on page 125.
Checking delivery
Check the enclosed packing list against the order. Visually inspect the
transport package, the instrument and the accessories for any possible
for completeness or
transport damage. If any parts are missing or damaged, contact your
damage
local Thermo Fisher Scientific representative or Thermo Fisher
Scientific Oy.
Caution If the instrument has been mechanically damaged, ship it for
service.
▲
Thermo Fisher Scientific
Thermo Scientific Wellwash Versa User Manual
15
Advertisement
Table of Contents
Troubleshooting
