Strip Selection With The Number Keys - Thermo Scientific Wellwash Versa User Manual

Strip selection with
the number keys
Thermo Fisher Scientific
It is possible to select the strips with the number keys regardless of
which row is highlighted in the Main menu.
The following rules apply when selecting the columns/strips:
1x8 wash head: Press the keys 1 to 12, any combination.
●
1x12 wash head: Press the keys 1 to 8, any combination.
●
1x16 wash head: strips 1 to 24 (press number keys 1–12 to select
●
two strips at a time)
2x8 wash head: strips 1 to 12 (press number keys 1–12 to select two
●
strips at a time)
2x12 wash head: strips 1 to 8 (press number keys 1–8 to select two
●
strips at a time)
All columns/strips: Double-press the 8 or 12 key to select all
●
columns/strips when the selection is empty.
Select or unselect a column/strip: Press the corresponding number
●
key.
Range of strips: First select the starting strip and then double-press
●
the key corresponding to the final strip in the range.
Deselect a range of strips: Double-press a key to delete all selected
●
strips in descending order.
Clear all selections: Hold the C / 12 key down for more than
●
2 seconds.
Note Strip selection is disabled if the Layout step is the first step of the
protocol. Refer to "Layout" on page 80. ▲
Thermo Scientific Wellwash Versa User Manual
Running Protocols
Strip selection
49