Cleaning The Plate Carrier - Thermo Scientific Wellwash Versa User Manual

Maintenance

Cleaning the plate carrier

Cleaning the
plate carrier
116 Thermo Scientific Wellwash Versa User Manual
To remove the priming vessel:
1. Push the priming vessel away from yourself towards the instrument
until you hear a snap.
2. Lift the priming vessel up and remove it (Figure 11–42).
Figure 11–42. Removing the priming vessel
3. Clean the priming vessel with a mild detergent and rinse with
deionized distilled water.
4. Replace the priming vessel by inserting it downwards and pulling it
towards yourself.
Warning The priming vessel may be contaminated after the instrument
has been used. ▲
To clean the plate carrier:
Caution Do not disassemble the plate carrier.
1. Switch the power off and unplug the instrument.
2. Use disposable powder-free gloves.
3. If spillages have occurred, move the plate carrier by pushing it to
the left (Figure 11–43). This makes it easier for you to clean the
area under the plate carrier.
▲
Thermo Fisher Scientific