Active calibration
Calibrate current wash
Thermo Fisher Scientific
The following calibrations are available:
Factory – For service purposes only. This can only be temporarily
●
activated and is active until the power is switched off.
User – The date of the last calibration is shown, initially the date of
●
the calibration in production.
The calibration is used for calibrating the wash head.
head
Note A new wash head of the same kind must be calibrated before
use.
▲
1. Select the Calibrate current wash head row and press the
button.
Menus, Tabs and Parameters
Thermo Scientific Wellwash Versa User Manual
Maintenance menu
OK
97