Rievtech xLogic ELC Series User Manual page 275

Display CPU name.
Current status:
Display the status of PLC
CPU clock:
When you click on the "CPU information","CPU clock" will display the current time of PLC.Select the "PC
synchronized",then click on "Set",the PC time will be written in PLC.
CPU Addr:
Display CPU address.You can change the address of PLC.
Example:
You can input "5" ,then click on"Set",the CPU address will be 5.
CPU model:
Display CPU model.
Firmware Ver:
Display Firmware Version.
Hardware Ver:
Display Hardware Version.
GPRS connection: (For EXM series CPU)
Display "connected" or "Not connected".
GSM signal:(For EXM series CPU)
Display GSM signal.
Variable Configure
"Variable config" interface
You can click on "Add Variable" to add variable. And you can change or delete the variable as well.
Up to 16 variables can be configured
Name:
You can define a name for variable.(8 characters can be input)
Item:
You can configure 13 kinds of variables.(These variables are in the xlogicsoft)
275