On-Line Monitoring/Test Circuit Program - Rievtech xLogic ELC Series User Manual

2. Download/Upload Function Block Program
After you debug the function graph successfully, you need to download it into xLogic, and operate as
following process.
Operation Method of read-in Program
a. First of all, connect xLogic with your PC through the optional way: RS232 cable, USB cable(need install
driver first), Ethernet connection.
b. Open xLogicsoft, create a new program, then open computer com port by click then menu Tools->
configuration with left button of the mouse, or click"
c. Click option "transfer->PC->xLogic" under menu "Tools"; or click button "
d. Click button " " with left button of mouse, start update Program, downloading status shown as Fig.
7.10.14 display update Program course.
Fig. 7.10.14 downloading status
Note: After the Program updated, xLogic will run the Program automatically, do not need restart.
Operation Method of Upload Program:
a. Click option "Transfer->xLogic->PC" under menu "Tools" with left button of mouse, or click
" "under toolbar.
b. Click button " " with left button of mouse, start upload Program, uploading status shown as Fig.
7.10.14 display upload Program course.

5.13 On-line monitoring/test circuit program

After you are satisfied with your program simulation and have downloaded it to xLogic CPU, you can also
perform an online test of the circuit program. An online test is similar to simulation in that you can view
inputs and outputs and block parameters. It differs, however, in that you are testing the program running
in the xLogic with "live" inputs rather than testing the program on the PC with simulated inputs.
Multiple registers can be accessed individually by clicking "Tools->Set Monitor Config".
245
Fig. 7.10.13 Setup Time Succeed
"in toolbar.
"in toolbar