Technical Data; General Unit Data; Signal Cable Agv50 - Siemens LMO39 Series Basic Documentation

20/61
Building Technologies
6

Technical data

6.1 General unit data

Mains voltage
- LMO39.100x1
- LMO39.100x2
Mains frequency
External primary fuse (Si)
Power consumption
Mounting position
Input current at terminal 1
Weight
Safety class
Degree of protection
Perm. cable length terminal 1
Cable lengths
∂
QRB1 / QRB3
∂
QRB4
∂
QRC
Remote reset
Detector cable
Control thermostat/pressurestat
Limit thermostat/pressure switch
Alarm terminal 10
Possible input current terminals 7 and 9
Current rating
- Terminal 1
- Terminals 3 and 8
- Terminals 4, 5 and 10
- Terminal 6
Table 2: Perm. terminal rating
6.2 Signal cable AGV50... display ↑ BCI
Signal cable
Cable length AGV50.100
Location
Basic Documentation LMO39...
6 Technical data
AC 120 V
AC 230 V
50...60 Hz
T6.3H250V to IEC 60127-2
12 VA
Optional
Max. 5 A
Approx. 160 g
I (burner control with plug-in base)
IP40 (to be ensured through mounting)
(if RJ11 jack is not covered, only IP10)
Max. 1 m at a line capacitance of 100 pF/m
(max. 3 m at 15 pF/m)
Max. 10 m at 100 pF/m (laid separately)
Max. 3 m at 100 pF/m (laid separately)
Max. 10 m at 100 pF/m (laid separately)
Max. 20 m at 100 pF/m (
Max. 10 m at 100 pF/m (
Max. 20 m at 100 pF/m (
Max. 20 m at 100 pF/m (
Max. 20 m at 100 pF/m (
1 mA
At cosι "0.6
Max. 5 A
Max 3 A (15 A during max. 0.5 s)
Max. 1 A
Max. 2 A
Color white
Unshielded
Conductor 4 x 0.141 mm²
with RJ11-connector
1 m
Under the burner hood (extra measures
required for compliance with SKII
EN 60730-1)
laid separately )
laid separately
)
laid separately )
laid separately
)
laid separately
)
CC1P7154en
15.03.2018