Table of Contents
Advertisement
20. Cut the applicator nozzle in order to provide a
minimum urethane bead of 8 mm (0.31 in) wide and
16 mm (0.63 in) high.
NOTE
The urethane adhesive bead must maintain a
consistent height and width uniformity.
21. Use a cartridge-type caulking gun in order to apply a
smooth, continuous bead of urethane adhesive.
Glass / Windows / Mirrors:
22. Use the edge of the window or the inside edge of the
reveal molding as a guide for the nozzle in order to
apply the urethane adhesive (1) to the inner surface
of the window (3).
NOTE
The liftgate glass must be installed to the
liftgate opening within 5 minutes after the
urethane adhesive is dispensed.
23. With the aid of an assistant, position the window into
the liftgate opening.
24. Align the masking tape on the liftgate window to the
liftgate masking tape.
NOTE
To prevent damage to the window due to
objects impacting an exposed edge, upon
installation, the window must rest 1 mm
(0.040 in) below the surface of the sheet
metal.
9E-61
Advertisement
Table of Contents
Troubleshooting
