Rear Number 2 Seat Replacement - Suzuki XL7 2007 Service Manual

Hide thumbs Also See for XL7 2007:

Table of Contents

9G-88 Seats:

Rear Number 2 Seat Replacement

Preliminary Procedure

1. Remove the rear seat number 2 cushion trim panel. Refer to "Rear Seat Number 2 Cushion Trim Panel

Replacement".

2. Remove the rear floor stowage compartment. Refer to "Rear Storage Compartment Replacement: ".

Rear Seat No. 2 Bolt (Qty: 8)

Refer to "Fastener Notice: ".

Tightening torque

45 N⋅m (33 lb ft)

Tip: Flip up the lower front finish cover to gain access to the front bolts.

Rear Seat No. 2 Assembly (Qty: 2)

• Each seat can be removed separately.

• Fold the seat down and remove through the rear of the vehicle.

Component Name