Power Mirror Switch Replacement - Suzuki XL7 2007 Service Manual

Installation Procedure

Power Mirror Switch Replacement

Callout
Preliminary Procedure
Remove instrument panel left air outlet assembly. Refer to "Instrument Panel Outer Air Outlet Replacement - Left
Side: ".
Power Mirror Switch Assembly
1
Tip: Reach through the outlet assembly hole, squeeze the tabs inward and push the power mirror
switch out through the front of the trim panel.
Glass / Windows / Mirrors:
1. Align the rear door window regulator motor assembly
to the rear door window regulator.
CAUTION
!
Refer to "Fastener Notice: " in Cautions and
Notices.
2. Install the rear door window regulator motor to
regulator screws.
Tightening torque
Tighten the rear door window regulator motor to
regulator screws to 8 N⋅m (71 lb in).
3. Connect the electrical connector to the rear door
window regulator motor.
4. Install the water deflector. Refer to "Rear Side Door
Water Deflector Replacement: ".
5. Install the rear door trim panel. Refer to "Rear Side
Door Trim Panel Replacement: ".
Component Name
9E-69