Lumbar Support Actuator Replacement - Suzuki XL7 2007 Service Manual

Lumbar Support Actuator Replacement

Callout
Fastener Tightening Specifications: Refer to "Fastener Tightening Specifications - Power Seats".
Preliminary Procedures
1. Remove the front seat. Refer to "Front Seat Replacement - Bucket".
2. Adjust the lumbar support knob until the lumbar basket is in the position of least support.
3. Remove the barrel end of the cable from the lumbar actuator.
Front Seat Recliner Handle
1
Tip: Pull firmly forward on the handle to remove.
Front Seat Outer Adjuster Finish Cover
2 Refer to "Front Seat Cushion Outer Trim Panel Replacement (Non Fold Flat)" "Front Seat Cushion
Outer Trim Panel Replacement (Fold Flat)".
Front Seat Belt Buckle
3
Refer to "Front Seat Belt Buckle Replacement: ".
Front Seat Inner Adjuster Finish Panel
4 Refer to "Front Seat Cushion Inner Trim Panel Replacement (Non Fold Flat)" "Front Seat Cushion
Inner Trim Panel Replacement (Fold Flat)".
Front Seat Lumbar Support Actuator Knob
5
Tip: Remove the lumbar knob by pulling firmly on the knob.
Front Seat Cushion Cover and Pad
6
Refer to "Front Seat Cushion Cover and Pad Replacement".
Front Seat Lumbar Support Actuator Screw (Qty: 2)
CAUTION
!
7
Refer to "Fastener Notice: ".
Tightening torque
2 N⋅m (18 lb in)
8 Front Seat Lumbar Support Actuator
Component Name
Seats: 9G-51