Front Side Door Window Regulator Replacement - Suzuki XL7 2007 Service Manual

9E-66 Glass / Windows / Mirrors:
Front Side Door Window Regulator
Replacement
Removal Procedure
1. Remove the front door outside handle. Refer to
"Front Side Door Outside Handle Replacement: ".
2. Remove the front door window run channel
assembly. Refer to "Front Side Door Window
Channel Replacement: ".
3. Remove the front door lower speaker. Refer to
"Radio Front Side Door Speaker Replacement: " in
Entertainment.
4. Disconnect the mirror electrical connector.
5. Disconnect the 4 electrical connector rosebuds (2 at
the mirror and 2 under the speaker).
6. Loosen the 2 rear module bolts.
7. Remove the 4 remaining module bolts.
8. Remove the 3 latch bolts from the door shut face.
9. Disconnect the door harness at the door jamb.
10. Remove the window regulator module from the door.
Installation Procedure
1. Install the window regulator module into the door.
2. Connect the door harness at the door jamb.
CAUTION
!
Refer to "Fastener Notice: " in Cautions and
Notices.
3. Install the 3 latch bolts to the door shut face.
Tightening torque
Tighten the bolts to 10 N⋅m (89 lb in).
4. Install the 4 module bolts.
Tightening torque
Tighten the bolts to 8 N⋅m (71 lb in).
5. Connect the 4 electrical connector rosebuds (2 at the
mirror and 2 under the speaker).
6. Connect the mirror electrical connector.
7. Install the front door lower speaker. Refer to "Radio
Front Side Door Speaker Replacement: " in
Entertainment.
8. Install the front door window run channel assembly.
Refer to "Front Side Door Window Channel
Replacement: ".
9. Install the front door outside handle. Refer to "Front
Side Door Outside Handle Replacement: ".