Danfoss VLT AutomationDrive FC 300 Programming Manual page 33

Parameter Descriptions
0-51 Set-up Copy
Option:
[0] No copy
*
[1] Copy to set-
up 1
3 3
[2] Copy to set-
up 2
[3] Copy to set-
up 3
[4] Copy to set-
up 4
[9] Copy to all
3.2.7 0-6* Password
0-60 Main Menu Password
Range:
100 [0 - 999 ] Define the password for access to the Main
*
0-61 Access to Main Menu w/o Password
Option:
[0] Full access
*
[1] LCP: Read only Prevent unauthorized editing of Main Menu
[2] LCP: No access Prevent unauthorized viewing and editing of
[3] Bus: Read only Read-only functions for parameters on
[4] Bus: No access No access to parameters is allowed via
[5] All: Read only
[6] All: No access
If Full access [0] is selected then 0-60 Main Menu Password,
0-65 Personal Menu Password and 0-66 Access to Personal
Menu w/o Password will be ignored.
Note: A more complex Password protection is available for
OEMs upon request.
32
FC 300 Programming Guide
Function:
No function
Copies all parameters in the present
Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 1.
Copies all parameters in the present
Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 2.
Copies all parameters in the present
Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 3.
Copies all parameters in the present
Programming Set-up (defined in
0-11 Programming Set-up) to Set-up 4.
Copies the parameters in the present set-up
over to each of the set-ups 1 to 4.
Function:
Menu via the [Main Menu] key. If 0-61 Access to
Main Menu w/o Password is set to Full access [0],
this parameter will be ignored.
Function:
Disables password defined in 0-60 Main
Menu Password.
parameters.
Main Menu parameters.
fieldbus and/or FC standard bus.
fieldbus and/or FC standard bus.
Read-only function for parameters on LCP,
fieldbus or FC standard bus.
No access from LCP, fieldbus or FC standard
bus is allowed.
MG.33.MB.02 - VLT
0-65 Quick Menu Password
Range:
200 [-9999 - Define the password for access to the Quick
*
9999 ] Menu via the [Quick Menu] key. If 0-66 Access
to Quick Menu w/o Password is set to Full
access [0], this parameter will be ignored.
0-66 Access to Quick Menu w/o Password
Option:
[0] Full access
*
[1] LCP: Read only Prevents unauthorised editing of Quick
[2] LCP: No access Prevents unauthorised viewing and editing
[3] Bus: Read only Read only functions for Quick Menu
[4] Bus: No access No access to Quick Menu parameters is
[5] All: Read only
[6] All: No access
If 0-61 Access to Main Menu w/o Password is set to Full access
[0] then this parameter will be ignored.
0-67 Bus Password Access
Range: Function:
0 [0 - 9999 ] Writing to this parameter enables users to unlock
*
the frequency converter from bus/MCT 10 Set-up
Software.
®
is a registered Danfoss trademark
Function:
Function:
Disables the password defined in 0-65 Quick
Menu Password.
Menu parameters.
of Quick Menu parameters.
parameters on fieldbus and/ or FC standard
bus.
allowed via fieldbus and/ or FC standard bus.
read only function for Quick Menu
parameters on LCP, fieldbus or FC standard
bus.
No access from LCP, fieldbus or FC standard
bus is allowed.