Danfoss VLT AutomationDrive FC 300 Programming Manual page 116

Parameter Descriptions
9-71 Profibus Save Data Values
Option: Function:
Parameter values changed via Profibus are not
automatically stored in non-volatile memory. Use
this parameter to activate a function that stores
parameter values in the EEPROM non-volatile
memory, so changed parameter values will be
retained at power-down.
[0] Off Deactivates the non-volatile storage function.
*
[1] Store all Stores all parameter values for all set-ups in the
setups non-volatile memory. The selection returns to Off
[0] when all parameter values have been stored.
[2] Store all Stores all parameter values for all set-ups in the
setups non-volatile memory. The selection returns to Off
[0] when all parameter values have been stored.
9-72 ProfibusDriveReset
Option: Function:
[0] No action
*
[1] Power-on Resets frequency converter upon power-up,
reset as for power-cycle.
[3] Comm option Resets the Profibus option only, useful after
reset changing certain settings in parameter group
9-**, e.g. 9-18 Node Address.
When reset, the frequency converter
disappears from the fieldbus, which may
cause a communication error from the
master.
9-75 DO Identification
Range: Function:
0 [0 - 65535 ] Provides information about the DO (Drive
*
Object).
9-80 Defined Parameters (1)
Array [116]
No LCP access
Read only
Range: Function:
0 [0 - 9999 ] This parameter displays a list of all the defined
*
frequency converter parameters available for
Profibus.
9-81 Defined Parameters (2)
Array [116]
No LCP access
Read only
Range: Function:
0 [0 - 9999 ] This parameter displays a list of all the defined
*
frequency converter parameters available for
Profibus.
FC 300 Programming Guide
0
0
0
0
0
0
®
MG.33.MB.02 - VLT is a registered Danfoss trademark
9-82 Defined Parameters (3)
Array [116]
No LCP access
Read only
Range: Function:
[0 - 9999 ] This parameter displays a list of all the defined
*
frequency converter parameters available for
Profibus.
9-83 Defined Parameters (4)
Array [116]
No LCP access
Read only
Range: Function:
[0 - 9999 ] This parameter displays a list of all the defined
*
frequency converter parameters available for
Profibus.
9-84 Defined Parameters (5)
Range: Function:
[0 - 9999 ] This parameter displays a list of all the defined
*
frequency converter parameters available for
Profibus.
9-90 Changed Parameters (1)
Array [116]
No LCP access
Read only
Range: Function:
[0 - 9999 ] This parameter displays a list of all the frequency
*
converter parameters deviating from default
setting.
9-91 Changed Parameters (2)
Array [116]
No LCP access
Read only
Range: Function:
[0 - 9999 ] This parameter displays a list of all the frequency
*
converter parameters deviating from default
setting.
9-92 Changed Parameters (3)
Array [116]
No LCP access
Read only
Range: Function:
[0 - 9999 ] This parameter displays a list of all the frequency
*
converter parameters deviating from default
setting.
3 3
115