Configuring The Nqa Statistics Collection Feature; Configuring The Saving Of Nqa History Records - HPE FlexFabric 5700 Series Network Management And Monitoring Configuration Manual

Step

Configuring the NQA statistics collection feature

NQA forms statistics within the same collection interval as a statistics group. To display information
about the statistics groups, use the display nqa statistics command.
NQA does not generate any statistics group for the operation that runs once. To set the NQA
operation to run only once, use the frequency command to set the interval to 0 milliseconds.
To configure the NQA statistics collection feature:
Step
1. Enter system view.
2. Create an NQA operation
and enter NQA operation
view.
3. Specify an NQA operation
type and enter its view.
4. (Optional.) Specify the
interval for collecting the
statistics.
5. (Optional.) Specify the
maximum number of
statistics groups that can be
saved.
6. (Optional.) Specify the hold
time of statistics groups.

Configuring the saving of NQA history records

Step
1. Enter system view.
2. Create an NQA
operation and enter
NQA operation view.
3. Enter NQA operation
type view.
4. Enable the saving of
history records for the
NQA operation.
Command
lower-threshold [ action-type { none |
trap-only } ]
Command
system-view
nqa entry admin-name
operation-tag
type { dhcp | dlsw | dns | ftp |
http | icmp-echo | path-jitter |
snmp | tcp | udp-echo |
udp-jitter | voice }
statistics interval interval
statistics max-group number
statistics hold-time hold-time
Command
system-view
nqa entry admin-name operation-tag
type { dhcp | dlsw | dns | ftp | http |
icmp-echo | snmp | tcp | udp-echo |
udp-tracert }
history-record enable
128
Remarks
Remarks
N/A
By default, no NQA operation is
created.
The UDP tracert operation does
not support the NQA statistics
collection feature.
The default setting is 60 minutes.
The default setting is two groups.
To disable collecting NQA
statistics, set the maximum
number to 0.
When the maximum number of
statistics groups is reached, to
save a new statistics group, the
oldest statistics group is deleted.
The default setting is 120 minutes.
A statistics group is deleted when
its hold time expires.
Remarks
N/A
By default, no NQA operation
is created.
The UDP jitter, path jitter, and
voice operations do not
support saving history records.
By default, this feature is
enabled only for the UDP
tracert operation.