Automated Control - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

UltiMate 3000 Series:
Fluorescence Detectors FLD-3100 and FLD-3400RS
3. Verify that the detector is connected to Chromeleon (the LED next to the Connect
button is green). If it is not, click Connect.
Fig. 30: Detector control panel (here FLD-3400RS)
The control panel provides access to the operating parameters and commands required for
routine operation of the detector. Additional functions are available in the Commands
dialog box. To open the Commands box from the panel tabset, select Command on the
Control menu.

5.4.3 Automated Control

With automated control, you create a program file (PGM) for automated operation of the
detector. Programs can be created automatically with the help of a software wizard or
manually by editing an existing program.
In addition to programs for sample analysis, you can also create programs for special
purposes, for example, to automate system shutdown (→ page 94) or to ensure that the system
automatically restarts operation as desired after a power failure. For details, see the
Chromeleon Help.
Operating Instructions Page 67