Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 50

UltiMate 3000 Series:
Fluorescence Detectors FLD-3100 and FLD-3400RS
Detector Page
The Detector page shows the detector configuration.
FLD Type
•
Select the detector type. Make sure that the selected option corresponds to the actually
installed detector type.
Device Name
•
Displays the name used to identify the detector the installation environment and in the
Chromeleon client program. To control the detector with the existing control panels,
accept the default name. If you enter a different name, you may have to re-link the
controls on the control panels and edit the device name in the program files.
• 2nd PMT
This check box must be selected if the optional red-sensitive Dual-PMT option for
measuring wavelengths up to 900 nm is installed.
• DAC Board
This check box must be selected if optional analog output are installed. (→ page 34)
Page 42
Fig. 12: Detector page
Operating Instructions