Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 64

UltiMate 3000 Series:
Fluorescence Detectors FLD-3100 and FLD-3400RS
View the progress of data acquisition on the detector display
After data acquisition was started via Chromeleon (AcqOn), you can monitor the progress of
data acquisition on the display. The display shows a scaled fluorescence value (in counts) at
the selected wavelength. The number of measurement channels determines the appearance of
the screen.
Run
1:
3:
MultiChannel
The status screen shows the following information:
• Fluorescence values
• Emission and excitation wavelength
• Operational Status
Lamp mode
•
• Retention time
• Filter wheel setting and sensitivity (only in Single-Channel Mode)
Page 56
FLD-3400RS
71289
HighPower RT:
FLD-3400RS
Ex 220 nm
46843
Em 325 nm
Ex 237 nm
25146
Em 460 nm
HighPower
Fig. 21: Data acquisition screen (examples)
@ wavelength
Ex 250 nm
Em 350 nm
2.3 FW 280nm
Ex 225 nm
2:
34352
Em 315 nm
4:
Ex 244 nm
19272
Em 400 nm
RT:
Sens 7
2.31
Operating Instructions