Troubleshooting; Overview - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

UltiMate 3000 Series:
Fluorescence Detectors FLD-3100 and FLD-3400RS

6 Troubleshooting

6.1 Overview

The following features help you to identify and eliminate the source for problems that may
occur during the operation of the detector or UltiMate 3000 system.
Status Screens
The status indicators on the front panel provide a quick visual check of the operational status
of the detector. They indicate whether the detector is turned on, connected in Chromeleon,
and operating properly (→ page 21).
Error Messages
If a fault or error is detected during the operation of the detector, a message appears on the
detector display. Check the Messages on the Detector Display section for recommended
courses of action (→ page 98). If the detector is operated by Chromeleon, a message is also
displayed in the Chromeleon Audit Trail.
Tip: For information about operating problems that might occur during the
operation of an UltiMate 3000 system, see Operating Problems (→ page 102).
If you are unable to eliminate a problem following the instructions given here, contact the
Thermo Fisher Scientific Service for Dionex HPLC products.
Operating Instructions Page 97