Service; General Notes And Safety Precautions - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

7 Service

7.1 General Notes and Safety Precautions

The following sections describe all procedures for the detector that the user may perform.
All other maintenance and service procedures must be performed only by Thermo Fisher
Scientific service personnel.
Warning:
Avertissement: Les composants fluidiques de l'instrument peuvent être remplis de
Before starting maintenance or service procedures, observe the following precautions:
• For all service and repair procedures, observe all precautionary statements provided in
these operating instructions.
• Use only the original spare parts and accessories authorized for the device by Thermo
Fisher Scientific.
• Before returning the detector for repair, contact the Thermo Fisher Scientific Service for
Dionex HPLC products. An RMA (Return Material Authorization) number is required in
order to track your instrument. Always use the original packaging and observe the
packing instructions when shipping the module. Shipping the module in anything other
than the original packaging voids the warranty.
If the original shipping container is not available, appropriate shipping containers and
packing material can be ordered from Thermo Fisher Scientific sales organization for
Dionex HPLC products. The packing instructions are included in the "Installation and
Qualification Documents for Chromatography Instruments" binder and are available on
request.
For instructions on shutting down the detector, see page 93.
Operating Instructions
The fluid components of the device may be filled with solvents that
are harmful to health. Wear appropriate personal protective
equipment. Rinse the fluid components with an appropriate solvent
to remove harmful substances.
For information about the proper handling of a particular substance
and for advice on specific hazards, refer to the material safety data
sheet for the substance you are using. Observe the guidelines of
Good Laboratory Practice (GLP).
solvants nocifs. Portez l'équipement de protection personnel
approprié. Rincez les composants fluidiques avec un solvant
approprié afin d'éliminer les substances nocives.
Pour les informations sur la manipulation correcte des composés et
des recommandations pour les situations de risque spécifiques,
veuillez consulter la fiche de données de sécurité des substances que
vous utilisez. Veuillez respecter des directives des Bonnes Pratiques
de Laboratoire (BPL).
Fluorescence Detectors FLD-3100 and FLD-3400RS
UltiMate 3000 Series:
Page 107