Rear Panel; Power Switch; Fuse Cartridge - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

UltiMate 3000 Series:
Fluorescence Detectors FLD-3100 and FLD-3400RS

2.6 Rear Panel

1 2 3
No. Description
1 Power switch (→ page 22)
Fuse cartridge (→ page 22)
2
3 Main power receptacle (→ page 34)
Type label
4
USB 2.0 (Universal Serial Bus) port for connection to the Chromeleon computer (→ page 23)
5
6 Analog outputs (optional, → page 34)

2.6.1 Power Switch

The power switch on the rear panel is the main power switch for the detector. Turn on the
power switch before initial operation of the detector and leave it on. For routine operation,
leave the main power switch on. For routine on/off control, use the standby button on the
front of the detector (→ page 21). Press and hold the button for about one second to allow
the detector to change the mode. Turn off the main power switch when instructed to do so,
for example, before performing a service procedure or when interrupting operation for
longer periods (one week or more). Observe the precautions on page 93.

2.6.2 Fuse Cartridge

The fuse cartridge contains two slow-blow fuses, rated at 2 A (5 x 20 mm). For
information about how to change the fuses, see page 114.
Page 22
4
Fig. 6: Rear panel
5 6
Operating Instructions