Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 68

UltiMate 3000 Series:
Fluorescence Detectors FLD-3100 and FLD-3400RS
To ...
Toggle between two operating states (for example, between Silent and Audible in the
Leak sensor mode).
Confirm the selection and perform the action.
For example, if you change the brightness of the display, you have to select OK to
confirm the change.
Cancel the action and restore the last value.
For example, if you have changed the brightness of the display, select Cancel to undo
this action and to restore the previous operating state.
Note: Depending on the selected option, specific keys may replace these general keys.
If an error is found, one or more messages appear on the front panel display. In this case,
the Prev, Next, and Clear keys appear on the navigation bar.
To ...
Return to the previous message.
Proceed to the next message.
Remove a message from the display.
Page 60
Select ...
Toggle
OK.
Cancel
Select ...
Prev
Next
Clear
Operating Instructions