Configurations - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

2.3 Configurations

The detector is available in the following configurations:
Detector Description
FLD-3400RS detector for measurements up to 200 Hz*. Up to four
wavelengths can be recorded simultaneously.
FLD-3400RS detector with Dual-PMT
FLD-3100 detector for measurements up to 100 Hz. However, only
one wavelength can be recorded.
FLD-3100 detector with Dual-PMT
*Only with Chromeleon 7.1 or later
Dual-PMT
The variants of the FLD with Dual PMT are equipped with a second PMT for the near
infrared region (up to 900 nm) (→ no. 10, Fig. 3, page 17). Depending on the PMT setting,
the instrument selects the suitable PMT for each measurement, or you can manually select
which PMT should be used. For emission scans, you can scan with both PMTs
simultaneously.
Detectors with a single PMT can later be upgraded with a second PMT by the Thermo
Fisher Scientific Service for Dionex HPLC Products.
Operating Instructions
Fluorescence Detectors FLD-3100 and FLD-3400RS
UltiMate 3000 Series:
Part no.
5078.0020
5078.0025
5078.0010
5078.0015
Page 19