Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 51

Signals Page
The page lists all signal channels that the detector can record. A name is defined for each
channel. To allow raw data collection for a channel, select the Enabled check box next to
the channel name. If the check box is cleared, the detector cannot collect raw data for the
channel. To change a name, click in the field and overwrite the existing name directly in
the field.
3.5.3.2 Changing the Configuration Properties
You may reopen the configuration pages later again to change the settings.
1. Start the Server Configuration program (→ page 39).
2. Right-click FLD-3x00(RS) Detector in the timebase and click Properties on the
menu.
3. Change the settings as needed. For a description of the pages, see section 3.5.3.1
(→ page 40).
4. To save the changed configuration, click Save on the File menu and then close the
Server Configuration program.
Operating Instructions
Fluorescence Detectors FLD-3100 and FLD-3400RS
Fig. 13: Signals page (here: FLD-3400RS)
UltiMate 3000 Series:
Page 43