Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 74

UltiMate 3000 Series:
Fluorescence Detectors FLD-3100 and FLD-3400RS
5. Change the display filter level if necessary. Right-click in the commands list and select
the filter level on the menu.
6. Verify that the detector is connected to Chromeleon. If it is not, select Connect to
connect the detector.
For a list of the commands and properties that are supported for the detector, see the
Chromeleon Help. In addition to the detector commands and parameters, the Commands
dialog box provides access to all of the commands and parameters available for all devices
that are installed in the selected timebase.
To open a control panel
1. On the View menu, click Default Panel Tabset or click the corresponding icon on the
toolbar , and then connect to the Chromeleon server.
Chromeleon creates centralized control panels, called panel tabsets, for all timebases
available on the Chromeleon server. A panel tabset provides control panels for the
individual instruments in a timebase and, in addition, one or more panels for performing
system-wide functions, for example, creating and running sequences. For more
information about panel tabsets, see the Chromeleon Help.
2. On the Panel Tabset for your timebase, click the page for the detector.
Page 66
Fig. 29: Commands dialog box
Operating Instructions