Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 126

UltiMate 3000 Series:
Fluorescence Detectors FLD-3100 and FLD-3400RS
Specification
Flow cells:
Control:
Analog outputs:
GLP features:
User input/display:
Safety features:
Power requirements:
Emission sound pressure level:
Environmental conditions:
Dimensions (h × w × d):
Weight:
Technical information: September 2013
All technical specifications are subject to change without notice.
Page 118
FLD-3100
Analytical standard flow cell:
Cell volume: 8 µL; pressure limit: 20 bar
Wetted parts: carbon reinforced PTFE, fused silica, stainless steel
Micro flow cell:
Cell volume: 2 µL; pressure limit: 40 bar
Wetted parts: carbon reinforced PTFE, fused silica, stainless steel
Identification of flow cell type and serial number by mean of an built-in
ID chip.
All parameters and functions software controlled, USB 1.1 3 LEDs
(Power, Connected, Status) for status monitoring
2 analog outputs via optional plug-in board to output fluorescence
channels
Resolution 20 Bit, maximum data rate 50 Hz, outputs can be configured
via software (output voltage range 0 to 1 V or 0 to 10 V, sensitivity and
offset)
In Chromeleon:
Full support of automatic equipment qualification (AutoQ
system performance monitoring
All system parameters are logged in the Audit Trail.
LCD indicating system parameters
Standby button
3 LEDs (Power, Connected, and Status) for status monitoring
Menu functions for maintenance
Power-up diagnostics of optics, cooling fans, motors, and electronics
Leak sensor
85-260 V AC, 50/60 Hz, max. 150 W
< 70 dB(A), typically 54 db(A)
Range of use:
Temperature:
Air humidity:
Overvoltage category:
Pollution degree:
16 × 42 × 51 cm (6.3 × 16.5 × 20 in.)
Approx. 18 kg (approx. 39.7 lbs)
FLD-3400RS
Indoor use
10 °C to 35 °C (50 to 95°F)
80% relative humidity,
non-condensing
II
2
Operating Instructions
™
) and