Main Menu
Engine Lubrication
Illustrated Index
OIL FILTER BASE
Illustrated Index,
page
8-12
OIL FILTER
One turn or
22 N-m (2.2 kgf-m,
16 Ibf-ft)
Replacement
8-5
Table of Contents
NOTE:
• Use new O-rings when reassembling.
• Apply oil to O-rings before installation.
• Use liquid gasket, Part No. 08718-0001 or 08718-
0003.
• If the bottom of the oil pan is deformed, it should be
repaired or the oil pan should be replaced to retain
proper clearance between the screen and the bottom.
OIL CONTROL ORIFICE
Remove with 6 mm
bolt and clean.
O-RING
Replace.
OIL PUMP
Illustrated index, page
8-7
Inspection, page
8-8
Apply liquid gasket to
mating surface of engine block.
OIL PAN GASKET
Replace.
OIL PAN
• Do not deform
the bottom.
• Refer to page
when installing.
8-10