At&F Set All Current Parameters To Manufacturer Defaults; At&V Display Current Configuration - Quectel M35 Command Manual

Reference
GSM 07.07
NOTE
See AT+GSN.
2.11. AT&F Set all Current Parameters to Manufacturer Defaults
AT&F Set all Current Parameters to Manufacturer Defaults
Execution Command
AT&F[<value>]
Reference
V.25ter
Parameter
<value> 0
2.12. AT&V Display Current Configuration
AT&V Display Current Configuration
Execution Command
AT&V[<n>]
Reference
V.25ter
Parameter
<n> 0
M35_AT_Commands_Manual
Response
TA sets all current parameters to the manufacturer defined
profile.
OK
Set all TA parameters to manufacturer defaults
Response
TA returns the current parameter setting.
ACTIVE PROFILE
<current configurations text>
OK
Profile number
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
20 / 186