Ats3 Set Command Line Termination Character; Ats4 Set Response Formatting Character - Quectel M35 Command Manual

Parameter
<value> 0
1

15.3. ATS3 Set Command Line Termination Character

ATS3 Set Command Line Termination Character
Read Command
ATS3?
Write Command
ATS3=<n>
Reference
V.25ter
Parameter
<n> 0-13-127

15.4. ATS4 Set Response Formatting Character

ATS4 Set Response Formatting Character
Read Command
ATS4?
Write Command
ATS4=<n>
Reference
V.25ter
M35_AT_Commands_Manual
Echo mode off
Echo mode on
Response
<n>
OK
Response
This parameter setting determines the character recognized
by TA to terminate an incoming command line. The TA also
returns this character in output.
OK
Command line termination character (Default 13=<CR>)
Response
<n>
OK
Response
This parameter setting determines the character generated
by the TA for result code and information text.
OK
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
181 / 186