At+Qmic Set Uplink(Mic) Volume - Quectel UG Series Command Manual

NOTE
This parameter will not be saved.
Example
AT+QWDTMF=?
+QWDTMF: (0,1),(0,1),("<DTMF_code>,<continuance_time>,<mute_time>[,...]")
OK
AT+QWDTMF=1,1,"1,1000,10,2,1000,2"
OK
+QWDTMF: 5
AT+QWDTMF=0,1,"1,1000,10"
OK
+QWDTMF: 5

12.12. AT+QMIC Set Uplink(MIC) Volume

This command is used to set MIC gains to change uplink volume.
AT+QMIC Set Uplink(MIC) Volume
Test Command
AT+QMIC=?
Read Command
AT+QMIC?
Set Command
AT+QMIC=<mode>,<volume>
Maximum Response Time
WCDMA_UGxx_AT_Commands_Manual
WCDMA UGxx AT Commands Manual
//Query the range.
//Play 1, 2 both uplink and downlink
//Only Play 1 on downlink
Response
+QMIC: (0-2),(0-15)
OK
Response
+QMIC:
<handset volume>,<headset volume>,<handfree volume>
OK
Response
OK
ERROR
300ms
Confidential / Released
UMTS/HSPA Module Series
193 / 247