<gainlevel> value is related to specific channel.
13.10. AT+QMIC Change the Microphone Gain Level
AT+QMIC Change the Microphone Gain Level
Test Command
AT+QMIC=?
Read Command
AT+QMIC?
Write Command
AT+QMIC=<channel>,<gainlevel>
Reference
Parameter
<channel> 0
1
2
<gainlevel> Range is 0 - 15
M35_AT_Commands_Manual
Response
+QMIC: (list of supported <channel>s), (list of supported
<gainlevel>s)
OK
Response
+QMIC:
<gainlevel(Normal_Mic)>,<gainlevel(Headset_Mic)>,<gai
nlevel(Loudspeaker_Mic)>
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Normal microphone
Headset microphone
Loudspeaker microphone
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
175 / 186