At+Cmss Send Sms Message From Storage - Quectel M35 Command Manual

character set (specified by +CSCS in TS 07.07); type of address given by <toda>
<tooa> GSM 04.11 TP-Originating-Address Type-of-Address octet in integer format (default refer
to <toda>)
<toda> GSM 04.11 TP-Destination-Address Type-of-Address octet in integer format (when first
character of <da> is + (IRA 43) default value is 145, otherwise default value is 129)
129 Unknown type(IDSN format number)
145 International number type(ISDN format )
<stat> PDU mode text mode
0
1
2
3
4
<length> Integer type value indicating in the text mode (+CMGF=1) the length of the message body
<data> (or <cdata>) in characters; or in PDU mode (+CMGF=0), the length of the actual
TP data unit in octets (i.e. the RP layer SMSC address octets are not counted in the length)
<pdu> In the case of SMS: GSM 04.11 SC address followed by GSM 03.40 TPDU in hexadecimal
format: ME/TA converts each octet of TP data unit into two IRA character long hexadecimal
number (e.g. octet with integer value 42 is presented to TE as two characters 2A (IRA 50
and 65))
In the case of CBS: GSM 03.41 TPDU in hexadecimal format
<index> Index of message in selected storage <mem2>
Example
AT+CMGF=1
OK
AT+CSCS="GSM"
OK
AT+CMGW="15021012496"
> This is a test from Quectel
+CMGW: 4
OK

8.10. AT+CMSS Send SMS Message from Storage

AT+CMSS Send SMS Message from Storage
Test Command
AT+CMSS=?
Write Command
M35_AT_Commands_Manual
Explanation
"REC UNREAD" Received unread messages
"REC READ" Received read messages
"STO UNSENT" Stored unsent messages
"STO SENT" Stored sent messages
"ALL" All messages
// Set SMS message format as text mode
// Set character set as GSM which is used by the TE
// Enter in text, <CTRL+Z> write message, <ESC> quits
without sending
Response
OK
Response
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
93 / 186