At+Qmmsend Send Mms Messages - Quectel EC2 Series Command Manual

AT+QMMSEDIT=2
OK
AT+QMMSEDIT=3
OK
AT+QMMSEDIT=4
OK
AT+QMMSEDIT=5
OK

2.3. AT+QMMSEND Send MMS Messages

AT+QMMSEND is used to send MMS messages. Customers should not re-execute AT+QMMSEND until
"+QMMSEND: <err>,<httprsp>,<mmsrsp>" is returned. When the <timeout> is reached, if the process of
sending MMS messages has not finished yet, MMS sending will be interrupted.
AT+QMMSEND Send MMS Messages
Test Command
AT+QMMSEND=?
Write Command
AT+QMMSEND=<timeout>
Parameter
<timeout> Integer type. The maximum time to send MMS messages. The range is 1-65535. Unit:
second.
<err> If MMS messages are sent successfully, <err> is 0. Otherwise, <err> indicates the error
code of the operation. Please refer to Chapter 5.
<httprsp> Integer type. The reply code of HTTP(S), for reference only. For example, 200 indicates
HTTP(S) posts data successfully. Please refer to Chapter 6.
<mmsrsp> String type. The reply string from MMSC when MMS messages failed to be sent, for
reference only.
EC2x&EG9x&EM05_MMS_AT_Commands_Manual
EC2x&EG9x&EM05 MMS AT Commands Manual
//Query the CC recipients.
//Query the BCC recipients.
//Query the title of the MMS message.
//Query the attachments.
Response
+QMMSEND: (1-65535)
OK
Response
OK
+QMMSEND: <err>,<httprsp>[,<mmsrsp>]
Or
+CME ERROR: <err>
LTE Module Series
15 / 25