Ricoh D143 Field Service Manual page 1073

017 Paper Transfer: 1st Side: S5
018 Paper Transfer: 2nd Side: S5
[Special 1: Leading Edge Correction] Special 1 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2753 and SP2757 are multiplied by these SP values.
2771
Plain: High speed, 1200: Low speed
• The paper leading edge area can be adjusted with SP2772.
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: 1200: 1st Side
Adjusts the correction to the discharge plate current at the paper leading edge in each
mode. SP2751 is multiplied by these SP values.
2771
• The paper leading edge area can be adjusted with SP2772.
005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side
007 Separation DC: 1200: 1st Side
[Special 1: Sw Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2772
paper leading edge between the erase margin area and the image area.
Plain: High speed, 1200: Low speed
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: 1200: 1st Side
[100 to 600 / 180 / 5%/step]
*ENG
148 mm > S5 size (Paper width)
[100 to 600 / 180 / 5%/step]
*ENG
148 mm > S5 size (Paper width)
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG [0 to 50 / 0 / 1 mm/step]
Main SP Tables-2
149