Switching On The Glomax ® Discover Instrument - Promega GloMax Operating Manual

Figure 5. The back of the GloMax
Tablet PC. C. Injector System connection. D. Power connection. E. On/Off switch.
2.B. Switching On the GloMax
1. Switch the instrument AC Power Adapter ON. Switch the instrument ON.
2. An LED light on the front right corner of the GloMax
3. Power up the Tablet PC by pressing and holding the power button on the perimeter of the Tablet PC.
Note: When powering ON, turn the instrument ON first and then the Tablet. A connectivity message may
appear in the software if the Tablet is powered ON before the instrument. If that occurs power OFF the
Tablet and then power the Tablet back ON.
4. The Tablet PC will begin its start-up protocol. After the operating software starts, either tap on the GloMax
Discover Software Icon or double tap the GloMax
the GloMax ® Discover software.
5. The GloMax Discover System is now ready to use.
®
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
www.promega.com
A B
Discover Instrument. A. Two USB ports. B. USB port to connect to
®
Discover Instrument
®
C D
Discover indicates when the instrument is ON.
®
Discover Software Icon on the Desktop screen to launch
®
E
®
13
TM397 · Revised 8/18