Promega GloMax Operating Manual page 12

1. Remove the instrument and accessory box from the shipping container.
Figure 3. Contents of the GloMax
2. Place the GloMax
in front of the instrument to allow the instrument door to open without hindrance.
Note: We recommend that two people lift the instrument into position.
3. Ensure that the instrument is placed in a location that will allow you to meet the power requirement
specifications (100–240V AC, 50/60Hz; Section 1.B).
4. Manually open the door of the instrument; use the Phillips-Head Screwdriver to remove the access panel
and the 7/64 inch Hex Wrench to remove the locking screws of the red Packing Bracket.
5. After removing the red Packing Bracket, remove the blue Packing Bracket Mount, and ensure the
instrument is free of any packaging material parts.
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
www.promega.com
Discover System accessory box.
®
Discover Instrument on a flat, level surface. Leave at least 7.5 inches (19cm) of clearance
®
11
TM397 · Revised 8/18