Promega GloMax Operating Manual page 22

Creating a New Protocol
Basic Protocol Steps
1. To create a new protocol, from the 'Protocols' screen, tap the New Protocol button at the bottom of the
screen (Figure 13).
2. You will be prompted to name the protocol. You also may provide a description, if desired.
Figure 16. New Protocol name prompt from the GloMax
Build your protocol by dragging and dropping protocol functions from the left panel onto the Protocol
3.
Window. Individual protocol functions are described in the Protoctol Functions section. Use the
Properties button on the right to modify the name and description of the protocol.
F igure 17. GloMax
®
protocols.
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
www.promega.com
Drag and drop
protocol steps
into white area.
Discover 'New Protocol' screen showing drag and drop feature to create custom
Discover software.
®
21
TM397 · Revised 8/18