Promega GloMax Operating Manual page 46

Creating a New Analysis Template
New analysis templates can be created prior to Analysis, or they can be created over existing data and saved to the
Templates list. Analysis templates can be applied to result files consisting of one read, or multiple reads.
1. Select New in the lower left corner of the 'Templates' screen.
2. When opening a result file containing two reads, the software will prompt the user to either take a ratio
of those two reads or proceed with analysis without taking a ratio. Select the formula mode before
proceeding to application of an analysis template. See descriptions of formula mode options in Applying
a Pre-Existing Analysis Template.
3. Select the plate format for the new analysis template from the drop-down list on the 'Select Plate Type'
screen, and touch OK. Options include: 6-, 12-, 24-, 48-, 96- and 384-well plates (Figure 46).
Figure 46. The 'Select Plate Type' screen. When creating a new analysis template, the first step is to select the
plate format for the analysis template from the drop-down list on the 'Select Plate Type' screen.
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
www.promega.com
45
TM397 · Revised 8/18