Promega GloMax Operating Manual page 9

1.D. Precautions and Special Instructions (continued)
Special Instructions
• Wipe up spills immediately.
• The GloMax
mechanical assemblies. Handle with care.
• Use caution around solvents because they may damage the plastic case of the GloMax
Instrument.
• Do not submerge the GloMax
• Do not expose the GloMax
damage may occur to the unit that will not be covered under warranty.
• Changes or modifications to this unit not expressly approved by Promega could void the user's authority
to operate the equipment.
• Do not use this device in proximity to sources of strong electromagnetic radiation (e.g., microwave oven)
because they may interfere with the proper operation.
• Do not use this instrument for anything other than its intended use.
• Always disconnect the power before cleaning or performing routine maintenance.
• Do not disassemble the instrument further than specified in this operating manual for routine
maintenance and use.
• If the equipment is used in a manner other than that specified by Promega, the protection provided by
the equipment may be impaired.
• Do not overfill multiwell plate wells because this may lead to spills and/or damage.
• If injectors are installed, check the tubing periodically and replace as needed to avoid leaks.
• Plug instrument and Tablet PC into the same wall socket or outlet strip to assure common grounding.
• Do not leave plate in the instrument after protocol is completed.
8
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM397 · Revised 8/18
Discover Instrument contains sensitive optical components and precision-aligned
®
Discover Instrument in water.
®
Discover Instrument to temperatures outside the specified range, as
®
® Discover
www.promega.com