Promega GloMax Operating Manual page 16

3. Close the door using the Door icon on the top right corner of the screen.
4. Select the Start button at the bottom right corner of the screen.
Figure 7. Plate tray extended.
5. Enter the name of the result file by touching inside the text box and entering a name (Figure 8).
Figure 8. Save Results Window.
6. Select Start to begin the protocol.
7. The protocol will begin acquiring data and will display the results in the plate format in real time on the
screen.
When the read is finished, Export and Analysis buttons will be active on the bottom left corner of the
8.
screen. Press Export to export results to the folder location specified by the administrator (Section 3.H,
Administrator Settings). Results can be viewed and exported at a later time by touching the Results button
on the 'Home' screen. Press the Analysis button to analyze results generated from the protocol (see
Section 3.F, Analysis of Results).
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
www.promega.com
15
TM397 · Revised 8/18