Promega GloMax Operating Manual page 91

7.A. Configuring the Tablet PC (continued)
Additional recommendations if using your own PC:
• Disable automatic Windows
• Disable automatic power off, sleep, or hibernation settings
• Disable "Fast Startup". Set the power button to Shut Down not Sleep.
• Disable any other automatically or manually started software that would consume PC resources during
operation.
• Ensure there are no domain policies that would overwrite any of the above settings.
Note: The Tablet PC that is provided with GloMax
above.
The first time you use the GloMax
!
options. Settings can be changed later if required by following the instructions again.
1. Touch Screen
The GloMax Tablet PC has a touch screen that can be used to navigate to the various screens. Touching and
®
holding an icon on the Tablet for 3 seconds is equivalent to a Right Click on a normal PC.
2. Date and Time
The date and time set on the Tablet PC are used for the instrument run log to indicate when a protocol was run on
the GloMax Instrument, as well as during kinetic runs to mark the time during each read.
®
For Windows 8:
®
a. Select the Windows
"control panel" in the Search tool if you do not see Control Panel).
b. On the 'Control Panel' screen, tap the Date and Time menu item.
c. First set your time zone by tapping the Change Time Zone button.
d. On the 'Time Zone Settings' screen, select the appropriate time zone for your location and whether you wish
the clock to automatically adjust for Daylight Savings Time.
Tap the OK button to save the time zone settings.
e.
f. You will be returned to the 'Date and Time Settings' screen.
On the 'Date and Time Settings' screen, tap the Change Date and Time button.
g.
h. Set the appropriate date and time for your current location using the calendar and clock setting icons.
i. Tap the OK button to save the date and time settings.
j. You will be returned to the 'Date and Time Settings' screen. Tap the OK button on this window to return to
the Control Panel.
Close the 'Control Panel' screen by tapping the red X button in the upper right corner of the screen.
k.
90
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM397 · Revised 8/18
updates and virus scans
®
Instrument and Tablet PC you should check the configuration of the following
®
8 Settings icon by swiping in from the right screen edge. Select Control Panel (or type
®
System has already been configured for the settings listed
®
www.promega.com