Promega GloMax Operating Manual page 30

Prompt
Use a message Prompt to provide the user with instructions. Tap Enter Message in the prompt, and a keyboard
will appear for the user. Type a user message, then tap OK to enter it into the protocol.
Figure 29. Prompt Function.
When the Open Door Prompt box is checked, the 'Prompt' screen shown in Figure 30 appears to the user during
protocol, with the option to open the door.
If Open Door is selected, the door will open, and the screen will offer the user a choice to Close Door. When
Close Door is selected, the door will close, and the prompt will offer the user a choice to Open Door or
Continue. When Continue is selected, the protocol continues to the next step. These prompts and commands are
useful if performing a multi-step protocol where the user must add reagent to the samples between measurements
prior to continuing the protocol.
Figure 30. 'Prompt' screen with the Open Door option.
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
www.promega.com
29
TM397 · Revised 8/18