Setting Up The Glomax ® Discover System; Setting Up The Glomax ® Discover Instrument And Tablet Pc - Promega GloMax Operating Manual

2. Setting Up the GloMax
2.A. Setting Up the GloMax
1. Unpack the Tablet PC from its shipping box.
2. Place the Tablet PC in the Tablet Holder on the top of the GloMax
shown in Figure 4.
Figure 4. Instrument front and Tablet PC holder setup.
3. Secure the Tablet PC in the Tablet Holder by using the 1/16-inch Hex Wrench to screw the Tablet Mount
Attachment Piece into place.
4. Using the provided USB cable, connect the Tablet PC to the USB port on the back of the instrument
(Figure 5).
5. Ensure that the instrument On/Off switch is in the OFF position (Figure 5).
6. Connect the Tablet PC to its power supply, and then connect the Tablet PC Power Cable to a power outlet.
7. Connect the Instrument AC Power Adapter to the back of the instrument and to a power outlet.
Note: We recommend connecting the instrument to an uninterrupted power supply (~500VA).
12
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM397 · Revised 8/18
Discover System
®
Discover Instrument and Tablet PC
®
Discover Instrument in the orientation
®
www.promega.com