Promega GloMax Operating Manual page 95

7.A. Configuring the Tablet PC (continued)
3. User Password and Setup (continued)
Assigning User Accounts to Promega Groups
The GloMax Software employs the Windows
®
and associated passwords. New user accounts should be created based on policies governing your institution. Only
someone with an Administrator account can assign users to Promega groups. You must close the GloMax
Software to create user accounts.
1. Follow the instructions for your Tablet PC operating system.
For Windows 8:
®
Swipe in from the right edge of the screen and select Search, then type in "lusrmgr.msc" and press Enter.
The Local Users and Groups item should appear.
For Windows 10:
®
a. Close the GloMax
left corner of the user interface. Touch the X in the upper left corner of the screen and then confirm that
you want to exit.
b. Touch the Search icon on the left side of the Taskbar.
c. Touch the 'Search' text box, then touch the Keyboard icon on the on the right side of the Taskbar to
open the on-screen keyboard and enter the text lusrmgr.msc (Figure 101, Panel A). Touch the X on the
on-screen keyboard to close the keyboard. Under the Best match header an item called lusrmgr.msc
should appear, touch this item to open the 'Local Users and Groups (Local)' screen (Figure 101, Panel B).
A.
Figure 101. Accessing Users and Groups. Panel A. Touch the Search button in the taskbar and enter
lusrmgr.msc into the search window to bring up the lusrmgr.msc item. Panel B. Touching the lusrmgr.msc item
from the search list opens the 'Local Users and Groups (Local)' screen.
94
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM397 · Revised 8/18
login user access levels as a security tool for adding approved users
®
Software if it is open. If not at the 'Home' screen, touch the Home button in the upper
®
B.
®
www.promega.com