Promega GloMax Operating Manual page 23

3.C. Protocol Screen (continued)
Figure 18. GloMax
4. Select filters, integration times and plate map (see below) as you build the protocol.
5. Rearrange steps by dragging and dropping as desired.
6. Delete steps by selecting the black X in the top right corner of the step.
Save the protocol by selecting either the Save or Save As button on the bottom right corner of the screen.
7.
If requested, enter any protocol name and description information and press the OK button. A user message
will appear indicating that the protocol was saved successfully.
To run the protocol, press the Start button in the lower right corner of the screen.
8.
Figure 19. GloMax
22
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM397 · Revised 8/18
Discover 'New Protocol' screen showing a step added to the protocol.
®
Discover New Protocol Successfully Saved user message.
®
www.promega.com