7.B. Icons and Symbols
Home screen
Exit Software
Quick access to the Tools Screen. Temperature (°C) is displayed.
25
Quick access to the Tools Screen. Orange Temperature value indicates heater is activated. Dashed
line indicates the instrument is busy (heating, opening/closing door, etc.)
Open/Close Door
Help Screen
From any screen other than the Home screen
Home. Pressing this icon will take you to the Home Screen.
Protocol screen
Favorite. Mark to select a favorite protocol, which will then sort to the top of the page.
Yellow favorite indicates selection.
Protocol Editor screen
Plate map is locked and applied to every step within the protocol
Plate map is unlocked, and each step of the protocol may have a different plate map selection.
Plate map
Attention, there is an error in the protocol. Hover over this icon for information.
Results screen
Press to turn the heat map display "on" or "off.
Delete a result file from the Results Screen.
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
www.promega.com
99
TM397 · Revised 8/18