Reading Program Data - Brother KE-430F Service Manual

7-8. Reading program data

1
2
3
Ending read/write mode
4
While reading
"PrG" appears in the tension
display
TEST indicator switches off
Select the " r5" SD data read/write mode.
(Refer to "7-3. Preparation for reading and writing data".)
2665B
Press the ENTER key.
・ The buzzer will sound and the sewing program data
and cycle program data will be read from the SD card
and stored in the sewing machine's memory, and the
sewing programs and cycle programs will then be set.
・ If no program data or cycle program data exists, an
error buzzer will sound.
2903B 2668B
When the display returns to the status in step 1, reading
of the program data is complete.
・ If you would like to use any other read/write modes,
press the
run it.
2665B
Press the TEST key.
2404B
KE-430F, BE-438F
7. USING SD CARDS
or key to select the mode and then
2414B
49